The outdoor forklifts produced by Mitsubishi have gained a great status of operating at peak performance. You do however have to take good care of it and do regular maintenance so as to get the longest life possible from your equipment. If you take care of your forklift it will work in an optimum way and as safely and efficiently as possible. The following tips below would truly help you increase engine life and maintain engine performance.
Perform Pre-Shift or Daily Inspections: By regularly checking all of the fluid levels within the engine, in addition to the other related things described within the Maintenance and Operation Manual of the lift truck, you will considerably maintain your equipment's performance and longevity.
Establish and Follow a PM or Planned Maintenance Program: A good planned maintenance program will closely follow the engine maintenance schedule which is set out by the manufacturer. Some of the main things the planned maintenance program includes are frequently replacing appropriate filters and the engine oil.
Implementing an engine oil analysis program is also very beneficial. It can help to provide a totally detailed breakdown of all the elements that are found in the oil. Like for instance, abnormally high amounts of silica or metals can indicate there might be a failed component inside of the engine. Moreover, these findings can indicate that the engine is ingesting dirty air. If these issues are investigated and dealt with early, you would greatly increase the overall life of the engine and help reduce repair costs.
Check and Change the Air Filter: Weak engine performance or poor fuel economy could be the outcome if you overlook to check and or replace the air filter in the engine on a regular basis. For example, engine life could be drastically reduced if you are working with a restricted air filter which enables dirty and unfiltered air to be pulled into the engine.
The Cooling System has to be Checked: The life of an engine and its performance could be significantly affected by the cooling system. The engine is engineered and designed to operate in a particular temperature range. Once that range is exceeded, damage might occur to the engine's internal parts. Frequent maintenance has to include replacing the engine coolant too. Failure to perform this type of maintenance could cause damaged engine parts, particularly regarding any parts which are made of aluminum.